CamelBak Eddy Insulated Navy Blue Stainless Bottle - 16.9 oz/0.5L capacity
Double-Wall vacuum insulation keeps water cool for hours
Flip, Bite and Sip. No tipping required (though possible: just remove the straw)
New, sleek shape fits in the hand and most cup holders
Naturally 100% BPA-Free, taste-free stainless steel. No inner liners or plastic coatings that aluminum bottles require.
Durable and spill-proof
Easy to carry: Integrated loop handle makes it easy to clip a carabiner or carry with the crook of a finger
Wide-mouth opening is easy to fill with ice and water and a breeze to clean
CamelBak Big Bite Valve is compatible with CamelBak Eddy and CamelBak Groove bottles
CamelBak Got Your Bak Guarantee: If we built it, we'll Bak it with our lifetime guarantee.
- Hydration Capacity: 16.9 oz / .5 L
- Weight: 13.4 oz
- Always: 100% BPA-Free
- Warranty: Got Your Bak Lifetime Guarantee
- Bottle Material: BPA-Free 302 Stainless Steel
- Cap Material: BPA-Free Polypropylene
- Bite Valve Material: The CamelBak Big Bite Valve is made from medical grade silicone
- Country of Origin: China
CLEANING THE EDDY STAINLESS
The eddy Stainless bottle can be easily cleaned with a bottle brush using warm water and mild soap.
Cleaning the lid:
The bite valve, straw and lid can be cleaned in the top rack of the dishwasher or by hand with warm, soapy water. Pull off the bite valve and straw from the cap. If you like to use a bottle brush, we don’t recommend forcing a brush through the Bite Valve slit. If you have the brush kit, run the small brush through the straw.
For a deeper cleaning, add a drop of mild soap or tablespoon of bleach to a clean glass jar filled with water. Drop the bite valve, straw and cap into the solution, and tightly close the jar’s lid. Shake the mixture around for 30 seconds, and then let the parts soak for about 15 minutes. Rinse and shake dry.
To re-assemble the lid:
Flip the stem collar (the component the bite valve attached to originally) to the open position. Orient the bite valve so the finger tab points towards the front of the cap. Push the bite valve firmly onto the stem collar. Press the straw back into place on the bottom of the lid. Ensure the straw covers the notches completely.
FAQ on the Camelbak Eddy
WHAT ARE CAMELBAK STAINLESS BOTTLES MADE OF?
All materials in CamelBak bottles are selected for their safety, durability, and cleanability. All materials are BPA-free and safe for use in a hydration bottle. CamelBak does not use materials that contain harmful phthalates.
The new CamelBak Eddy Stainless Insulated .5L is made with medical-grade stainless steel. Stainless steel is a special type of steel that is naturally stain-resistant, corrosion-resistant and taste free. Because of these unique benefits, stainless steel is used in a variety of products from cookware and mugs to medical and surgical devices and food processing equipment. Stainless steel is strong, scratch-resistant and provides a naturally bright, clean finish without coatings or paints.
The CamelBak Eddy caps are made primarily from polypropylene, with other plastics that are all BPA-free and free of harmful phthalates. The bite valve is medical-grade silicone for long life and taste-free performance. The straw is made of polyethylene, the same material used in milk jugs.
WHY STAINLESS STEEL AND NOT ALUMINUM?
When we design a product we look for the best material to satisfy customer requirements. For metal bottles, consumers tell us they prefer the durability and purity of stainless steel. Aluminum bottles have to be made with an inner coating or liners—often with undisclosed ingredients—to protect the metal, which isn’t required on a stainless steel bottle. Stainless steel is also stronger, harder and more scratch resistant than aluminum, making a more durable long-lasting bottle for all your adventures.
WHAT IS VACUUM INSULATION AND HOW IS IT MADE?
To make our Insulated .5L bottle we first construct an inner and outer bottle which are sealed together and welded shut to be completely air-tight. Then the bottle is connected to a high-power vacuum pump which removes all the air from the gap in between the inner and outer bottle. Since there’s nothing to conduct heat across the gap, vacuum insulation is more effective than foam or other common insulating materials. Vacuum insulation works so well, it is the technology of choice for cryogenic storage tanks and other high-performance insulating vessels. Our vacuum insulated bottle can keep your beverages cool for hours.
SOME OTHER BOTTLES TALK ABOUT “EXTRUDED” CONSTRUCTION. HOW ARE YOUR STAINLESS STEEL BOTTLES CONSTRUCTED?
Metal extrusion is a process by which a single piece of metal is compressed under extremely high pressures to stretch it into a new shape, like a bottle. Extrusion processes place a lot of stress on the material and also consume a lot of energy. Our stainless steel bottles are made with a welded construction. At the start, a precision-rolled sheet of steel is cut and formed under low pressure into the shape of the bottle, then welded. Finally the bottle is ground and brushed to provide a finished appearance. Welded construction gives more freedom and control over product shape and design, and also enables us to create a lightweight double-wall vacuum bottle for our .5L insulated eddy.
About Camelbak, the company
If you have found yourself wondering— with the unlimited amount of time you have reclaimed by texting instead of emailing— what CamelBak is really like, read through our mission statement and values.
AN IDEA BORN FROM THE MOST BASIC HUMAN NEED — THIRST
Bicycle enthusiast, Michael Eidson, is competing in the "Hotter'N Hell 100." And that's exactly what it is: a 100-mile road race in the grueling summer heat of Wichita Falls, Texas. Water is vital to surviving the race, and there are few places to refill a water bottle. Eidson, an emergency medical technician by trade, decides to fill an IV bag with water and slip it into a white tube sock. Yes, a tube sock. Then he stuffs the contraption into the back of his bike jersey, throws the thin hose over his shoulder and clamps it with a clothespin.
Hands-free hydration is born. And Eidson is able to drink as he pedals...while the other racers laugh and fiddle with their water bottles.
OPERATION HYDRATION — THE ROAD TO SURVIVAL
Jeff Wemmer, a competitive cyclist who fell hard for CamelBak, was so impressed by the product that he started bringing packs to races to sell them. Talk about a fan. CamelBak eventually hired him, and in 1993, Jeff embarked on a road trip to keep the start-up running during very tough times.
Company lore has it that Jeff visited bike shops from Florida to California, pitching our renegade product from the back of his motorcycle. Each order Jeff faxed back to the factory literally breathed another day of life back into CamelBak.
THE REST IS HISTORY
It took courage, conviction and imagination to evolve from an IV bag in a tube sock sold by a motorcycle-driven sales force of one. Camelbak's core values remain the same and drive everything they do - from inventing the hydration category to becoming the world's leading maker of hydration solutions.
Oh yeah...about those bikers who laughed at Eidson? Well, chances are they've got a CamelBak strapped to their back or in their bike cage these days. Go figure...